CFRJY - 104 1870 COLOREDGE 1550 BLACK DEVELOPER, 600GRAMS

  • MSDS: CFRJY
  • Manufacturer: EASTMAN KODAK COMPANY
  • Product Name: 104 1870 COLOREDGE 1550 BLACK DEVELOPER, 600GRAMS
  • National Stock Number: 6850-01-374-0611
Product Identification

Product ID:104 1870 COLOREDGE 1550 BLACK DEVELOPER, 600GRAMS
MSDS Date:04/30/1997
FSC:6850
NIIN:01-374-0611
MSDS Number: CFRJY

Responsible Party
EASTMAN KODAK COMPANY
343 STATE STREET
ROCHESTER, NY 14650
US

Emergency Phone: 716-722-5151

Info Phone: 800- 242-2424

Cage: 19139

Contractor
EASTMAN KODAK CO US CUSTOMER SERVICE/GOVERNMENT SALES
ROCHESTER, NY 14650-3129 US

Telephone: 800-828-6203

Cage: 5K871

Ingredients

FERRITE POWDER (MIXTURE CONTAINING INGREDS #2,3,4)

Fraction By Weight: 85-95%


IRON OXIDE

CAS: 1309-37-1

RTECS: NO7400000

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5MG(FE)/M3FUME,B2;96


CUPRIC OXIDE

CAS: 1317-38-0

RTECS: GL7900000

Fraction By Weight: <14%

OSHA PEL 1 MG CU/M3

ACGIH TLV: 1 MG CU/M3


ZINC OXIDE (SARA 313) (CERCLA)

CAS: 1314-13-2

RTECS: ZH4810000

Fraction By Weight: <14%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9596


POLYESTER RESIN

CAS: 39382-25-7

Fraction By Weight: 3-7%


80100185-5011P &

Fraction By Weight: <1%


SALICYLIC ACID CHROMIUM (III) CHELATE

CAS: 72869-85-3

Fraction By Weight: <1%


BLUE PHTHALOCYANIME PIGMENT

CAS: 147-14-8

Fraction By Weight: <1%

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL:EXPECTED TO BE A LOW HAZARD FOR
RECOMMENDED HANDLING. EYES:NO SPECIFIC HAZARD KNOWN.MAY CAUSE
TRANSIENT IRRITATION. SKIN:EXPECTED TO BE LOW HAZARD FOR
RECOMMENDED HANDLING. INGEST:EXPECTED TO BE LOW INGESTION HAZARD.
Explanation of Carcinogenicity:PER MSDS:CARCINOGENICITY
CLASSIFICATION:IARC/ACGIH/NTP/OSHA:NONE.SALICYLIC ACID
CRHOMIUM(III) CHELATE-NOT HUMAN CARC(A4)
Effects of Overexposure:TRANSIENT EYE IRRITATION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INHAL:IF SYMPTOMATIC MOVE TO FRESH AIR.TREAT
SYMPTOMATICALLY.GET MED ATTN IF SYMPTONS PERSIST. EYES:ANY MATL
THAT CONTACTS EYE SHOULD BE WASHED OUT IMMED W/WATER.GET MED ATTN
IF SYMPTOMS OCCUR. SKIN:W ASH W/SOAP & WATER.GET MED ATTN IF
SYMPTOMS OCCUR. INGEST:DRINK 1-2 GLASSES OF WATER.SEEK MED
ATTN.NEVER GIVE ANYTHING BY MOUTH IF UNCONSCIOUS.

Fire Fighting

Autoignition Temp:Autoignition Temp Text:NP
Extinguishing Media:USE APPROPRIATE AGENT FOR ADJACENT FIRE.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS &
PROTECTIVE CLOTHING. FIRE OR EXCESSIVE HEAT MAY PRODUCE HAZARDOUS
DECOMPOSITION PRODUCTS.
Unusual Fire/Explosion Hazard:NONE. NON-COMBUSTIBLE SOLID.

Accidental Release

Spill Release Procedures:SWEEP MATERIAL ONTO PAPER AND PLACE IN FIBER
CARTON.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID BREATH DUST.USE W/ADEQUATE
VENTILATION.KEEP CONTAINER CLOSED.
Other Precautions:MATL HAS NOT BEEN TESTED FOR ENVIRO EFFECTS.IN SPILL
SITUATION THIS MATL MAY BE VISUALLY UNPLEASANT;HOWEVER IT IS NOT
EXPECTED TO CAUSE ANY ADVERSE ENVIRO EFFECTS.

Exposure Controls

Respiratory Protection:NONE SHOULD BE NEEDED.
Ventilation:GOOD GENERAL VENTILATION (TYPICALLY 4-6 RM VOL/HR) SHOULD
BE USED. VENTILATION RATES SHOULD BE MATCHED TO CONDITIONS
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:GOOD INDUSTRIAL HYG PRAC-MIN EYE CONTACT
Other Protective Equipment:WASHING FACILITIES.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:NP
Melt/Freeze Pt:M.P/F.P Text:212F,100C
Decomp Temp:Decomp Text:NP
Vapor Pres:NEGLIGIBLE
Vapor Density:N/AVAI
Spec Gravity:1.0-4.5
pH:N/APPL
Viscosity:NP
Evaporation Rate & Reference:NP
Solubility in Water:NEGLIGIBLE
Appearance and Odor:SOLID, BLACK COLOR, SLIGHT ODOR
Percent Volatiles by Volume:NEGLIG
Corrosion Rate:NP

Stability

Stability Indicator/Materials to Avoid:YES
NONE W/COMMON MATERIALS & CONTAMINANTS W/WHICH THE MATERIAL MAY
REASONABLY COME INTO CONTACT.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON DIOXIDE, CARBON MONOXIDE,
OXIDES OF IRON.

Disposal

Waste Disposal Methods:INCINERATE OR LANDFILL.CAN BE INCINERATED WHEN
IN COMPLIANCE WITH LOCAL REGS.DISCHARGE/TREATMENT/DISPOSAL MAY BE
SUBJECT TO NATIONAL/STATE/LOCAL LAWS.CHEMS SUBJ TO REPORTING REQMTS
OF SEC 313 TITLE II I SARA/40CFR372:COPPER OXIDE, ZINCE OXIDE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.